The dovetails on the CZ 527 are 16mm, the Signature Zee rings are for weaver bases.
Burris do a 16mm CZ 527 Ring but they don't have the Signature pos-align insert feature.

 

The dovetails on the CZ 527 are 16mm, the Signature Zee rings are for weaver bases.
Burris do a 16mm CZ 527 Ring but they don't have the Signature pos-align insert feature.

Thank you for the info. Much appreciated.

 

But to clarify the 16mm Burris ring is 1", not 30mm.

You might be able to find a 16mm to weaver rail, but it'll probably make your mount super high. CZ 527 scope mounting can be a real hair puller, good luck

 

OK at least a start. Thanks again

 

Just be careful if you go with a rail it puts the scope a mile high over the action. Here is my 527 American in 17 Hornet with CZ factory rail. Could not stand it. Way too high.



Here are pictures from 59801 that I saved:







Hope this helps. These are all 1 inch.

Signalman 🚦

 

Warne is what you want!

AQBill