Super Stock Photos, Show Your Rigs

Don Hanson · Feb 20, 2009

I don't know if this has been done here but I'm sure a lot of rigs have changed,
especially Rico's, lol...

I thought we needed a thread with all the rigs, so we can show folks what
Super Stocks look like, and what they can do. Maybe show one or two of your
best targets?

I was thinking of a pictures only thread but I know that wont work here!

So post em all up and talk about em, if ya want to :bthumb:
List the games your rigs have made also..

Here's mine;

The first, 'DH Special' (Light Sporter) is in the 1/4" game, 1/8'' game and 13mm 50yd game.
The second 'Heavy Stocker' is in the 1/4", Two Zee and Three Zee games.
The third 'T/C Classic' is in the 1/4" game.

I need to iron out some probs with the '69 finger groove' and will get it in some of the games too.

I'm also going to repalce a couple photos later with better and an updated pic of the 69 FG with scope and the Heavy Stocker.

JJFUNK · Feb 20, 2009

I had you by as solid 5 minutes, but I don't mind, I just want to see it happen, and it is your idea, so no biggie.

JJ

infest · Feb 20, 2009

lol this is gonna be a long thread seings how most of us can't leave well enuf alone

Don Hanson · Feb 20, 2009

JJ, I saw that. I'm slow to type and put up photos.
If I'd have seen yours first, I would have just added mine there.
But like you said, I just want to see it happen also :t

Thanks,
Don

Que · Feb 20, 2009

there was/is a thread of "pics of the rigs" but there is no telling where its buried and probably outdated by now.

1494 · Feb 20, 2009

Some are finished and some aren't. The black one is a Magnum.

Chaser · Feb 20, 2009

patience0830 · Feb 28, 2009

whatcha callin this?

Chaser said:

i say "barnwood"

edgerat · Feb 20, 2009

Just the one so far... the way this one is going it may or may not be my last

DH special, 16.5" 77/22 GM stainless fluted, PC hammer and sear and a few other doo-dads.
isaac

12851 · Feb 20, 2009

here is my T/C Varmint,

re-finished the stock with some RIT, and it does shoot! only thing "wrong"
is the lack of after market parts,

Rico....

OpsMgr · Feb 20, 2009

1965 model Carbine w/walnut stock
Irons Only Club

CPC bolt
Skeeter "001 Fully Floated" sear and hammer
DIY auto bolt release
Black Widow bolt buffer
Skeeter stainless recoil guide rod

Stainless Walnut DSP
1/8" SuperStock Club
1/4" SuperStock Club
1/4" Ulti Club
13mm Club

CPC bolt
GM 20" fully floated stainless fluted sporter barrel
VQ TG2000 trigger group
WK bolt buffer
VQ takedown screw
Bushnell Trophy 6-18x40AO scope
Leupold base and rings

Blue Birch DSP
1/8" SuperStock Club
1/4" SuperStock Club
1/4" Ulti Club
13mm Club

CPC bolt
GM 20" fully floated blued fluted sporter barrel
TTShooter trigger group
WK bolt buffer
VQ takedown screw
Bushnell 4-12x40AO scope
Leupold base and rings

1976 Liberty model Carbine w/walnut stock, AKA Libby
1/4" SuperStock Club
1/4" Ulti Club
13mm Club

CPC bolt
GM 16" fully floated blued non-fluted sporter barrel
VQ hammer, sear, disconnector & trigger
VQ auto bolt release
WK bolt buffer
VQ takedown screw
B&C extended mag release
Bushnell 4-12x40AO scope
Leupold base and rings

Al the Infidel · Feb 20, 2009

Been a "deep"~16' snow winter so shooting is a thing of the past n future here.

Even with a rattle can job I never cared for the plastic stock so I swapped with my 597-17 stock and got a thumbhole for the 17. 17 shoots better than 1/4"@50yds. Best we can do in the stock dept. for 597s without heading to the $$custom shop. The plastic 22 had an aluminum tape bedding when it qualified but now both 597s have real beds. I also squared the bolt on the 22 with dremel and file

so the headspace of 51 is now 43 and THAT remains to be tested also. It seems I'm destined to do 2 mods at a time so I'm never sure what/which one did the trick. Had 2 wives also but I got that figured out.

I forgot about this hat until I was rummaging through my collection the other day and it made me think of you guys!!

Que · Feb 20, 2009

My first SS. thanks to AK and Earth as they were the ones that found me in the factory area and directed me to Super Stock :bthumb:

the build: http://www.rimfirecentral.com/forums/showthread.php?t=185375
the shoot'n and tweak'n: http://www.rimfirecentral.com/forums/showthread.php?t=189505

Que · Feb 20, 2009

and there was this one: Plain Jane

http://www.rimfirecentral.com/forums/showthread.php?t=201199

Que · Feb 20, 2009

there is the 68FG build

http://www.rimfirecentral.com/forums/showthread.php?t=215031

Que · Feb 20, 2009

there is this one that about got me in trouble on here

http://www.rimfirecentral.com/forums/showthread.php?t=201155
it has since been restocked

Que · Feb 20, 2009

lets not forget "Stubby"

http://www.rimfirecentral.com/forums/showthread.php?t=209384

Que · Feb 20, 2009

my latest build "Brusier"

http://www.rimfirecentral.com/forums/showthread.php?t=245436

Que · Feb 20, 2009

my Maple FG build

http://www.rimfirecentral.com/forums/showthread.php?t=218821

12851 · Feb 20, 2009

great looking builds, all,

just goes to show the gamut of what a builder can do with a bit of
imagination and talent, of which i have neither, lol, PLUS, they all shoot
very well,

Rico....

roothog · Feb 20, 2009

Alright, guys, this is more like it. Things were getting a little slow here. I haven't heard a hearty'' Avast, ye swabs'' or "ARRR me mates""
in quiet a while. Maybe this thread will get our spirits up for the upcoming shooting season.
Avast,Que, thats some good looking builds.... for a swabbie ,that is!!

:crossbones RH

roothog · Feb 20, 2009

Ol' Hamp. Walnut stocked 10/22 carbine with " Nemohunter-ized" barrel and bolt, polished ruger trigger,bolt buffer, barrel-pad floated minus barrel band, Tasco 6-24x AO scoped.
Sawdust 1/4 inch challange, Rigger Ammo 1/4 inch challange. ( thus far)

RH

Vincent · Feb 21, 2009

Vincent's

Box stock T/C Classic:
Made both SuperStock and Ultimate 1/4" Clubs:

Development rifle:

Blue Twin:
Walnut DSP Stock, Glass bedded per SuperStock Tech Tutorial
GM Blue Heavy Sporter
Skeeter Satin Black bolt handle w/polished rod and spring
Skeeter Satin Black Mag release
Skeeter Trigger
Talley Lightweight Mount/Rings
Bolt pinned, polished, radiused and headspaced by me.
VQ Hammer/Skeeter Sear/ Trigger assy built and tuned by me
Mueller APV 4.5-14X or BSA Platinum 8-32X

Stainless Twin:
Walnut DSP Stock, Glass bedded per SuperStock Tech Tutorial
GM Stainless Heavy Sporter
Skeeter Satin Black bolt handle w/polished rod and spring
Skeeter Satin Black Mag release
TN Precision Arms Trigger
Talley Lightweight Mount/Rings
Bolt pinned, polished, radiused and headspaced by me.
VQ Hammer/Skeeter Sear/ Trigger assy built and tuned by me
Mueller APV 4.5-14X

Glenfield 75C - Built for Jade in her favorite color:

]

Green Meanie - Assembled for my Daughter in camp in the desert.

Ruger laminated stock - Glass bedded
GM Stainless Barrel
Skeeter Green Bolt handle, spring and polished rod
Skeeter Green Mag release
Bolt pinned/headspaced/radiused by me
Weaver RV7 2.5-7X

Ruger MKII Government Competition:

12851 · Feb 21, 2009

heck, Que,

gonna be hard to follow your "show-n-tell, lol,

but some here may remember this "lawdy gawdy" haha,

Rico....

Que · Feb 21, 2009

RICOCHET said:
but some here may remember this "lawdy gawdy"
Rico....

I've always liked the looks of that one rico :bthumb:

lindertw · Feb 21, 2009

unnamed work in progress:

Best grouping in bone stock config has been 0.200" (CCI SV), just can't seem to get four good groupings all on one sheet

I tore her down tonight to install a PC hammer/adjustable sear kit, and I have a spare DSP stock awaiting installation.

1494 · Feb 21, 2009

Many fine looking builds fellas:t:t

Passinby · Feb 21, 2009

My favorite SS:

GM Midweight barrel

And the most accurate:

1/8" qualifier

Super Stock Photos, Show Your Rigs

Our Vendors

Top Contributors this Month

Recommended Communities