I will be watching this post with great interest.

 

It’s been pretty sparse out there for Revel support. I’ve only heard of EGW making a pic rail

 

I don't know about an aperture sight set, but I mounted a set of hiviz fiber optic HHVS500 on mine. So far it shoots to point of aim at 25yds. Haven't had an opportunity to test it further yet!
I'd be interested to know of an aperture set that works as well.

 

Fiber optic may be a good choice.
I also found this fixed ring, just have to figure out what distance I would want,

Marble's Fixed Bullseye Rear Sight 0.438 Height

The Bullseye rear sight naturally centers the front bead much like an aperture sight but with improved target visibility. Young or inexperienced...

www.midwayusa.com

Then there is this adjustable one but the length and pin dont match,

Marble's Adjustable Bullseye Rear Sight 2-3/4

The Bullseye rear sight naturally centers the front bead much like an aperture sight but with improved target visibility. Young or inexperienced...

www.midwayusa.com

I will have to do some shooting to understand what I like better.

 

I bought the EGW rail and put a 1-6x24 SFP illuminated LVPO. At 1x it's basically a red dot. At 25-30yds it'll easily hold >.50 groups. At 50yds it a capable small game hunter. Shoots CCI SV 1070 very well.

 

At the suggestion of one of the members here, I mounted a 10/22 rail, only using the two outside mounting holes. When I got my Revel, EGW was out of stock on the appropriate rail.

 

That's how I mounted a Williams peep sight on this rifle when iI first got this rifle there were no bases available
the odd spacing of the DT on the reciever, dang I tried all sorts of combination bases until I found the Weaver T09 base
it's pretty flat and has 3/8 dove tail groove perfect for this peep sight
5D-AIRGUNS GR

 

I have used the dovetail mount skinner sight and I liked it pretty well, but I am swapping to a marbles semibuckhorn for aesthetic purposes.

 

did you have to change the front sight?

 

Talley has a Revel specific mount/ring now. Has anyone tried it?

 

Biggest problem with the Talley system is that they are not detachable, meaning if you have scope issues you must remove the mounts before putting the rifle back in service.