Rimfire Central Firearm Forum banner
1 - 1 of 19 Posts

· Registered
1,554 Posts

You might want to tape or draw with a pencil or scratch a line on each side of the forestock at equal distance from the current channel that will serve as a gauge to sand by especially if you are new to stock work. You will have a tendency to sand harder on one side L or R and to sand deeper on one end or other that will get you a bigger gap on one side than the other. Good luck..
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.