Rimfire Central Firearm Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
22,250 Posts
Chief says: Ski gives you good advise.

Ya can use the 10-22 LR trigger in yer magnum. if your firing pin
is in good shape. meaning the weaker hammer spring will
still hit with enough force.
The bolt hold open device will still work in the magnum. It just
will not hold open the bolt as far.

CD.
 

·
Registered
Joined
·
22,250 Posts
Chief says : it will work just fine.

The LR bolt hold open device , will not hold the bolt open
as far , when used in the 10-22 magnum - but will work.

The feeding problems were no dought - magazine tension.

The miss fires = firing pin = weak link in the 10-22 magnum.

Titanium = lighter in weight - gives weaker hits on rims.
be prepaired to replace it soon. An aftermarket steel
firing pin is your best bet.
When buying new steel pin = seek one with a flat type
point vrs the factory looking " pointed one" .
they are hard to find , but they are out there.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top