Rimfire Central Firearm Forum banner

VQ bedding kit

548 5
does anyone have any info/insight on the vq bedding kit
1 - 6 of 6 Posts

·
Registered
Joined
·
1,137 Posts
Crossfire, may I suggest that you install the VQ bedding kit, shoot your rifle a while and see how you like the results. I have used them with excellent results (1/2" average size groups @ 50 yds using Wolf MT ammo).

MKnarr has written an excellent post on bedding the 10/22, and his method utilizes the VQ bedding pillar so you have nothing to loose if you later desire to do a complete bedding job. You will already have the VQ bedding pillar installed which is the first step of his procedure anyway.

His post is now in the Tips & Tricks Forum. Here is a quick link to it.
http://www.rimfirecentral.com/forums/showthread.php?t=95016#top

The kit includes a drill bit with a stop welded to it, or you can buy a refill kit without the drill if you want to save a few bucks. Hawktech Arms is a good place to get either. Here is a link. Just scroll down the page until you see it.
http://www.hawktecharms.com/ruger/10-22.htm
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top