Rimfire Central Firearm Forum banner
1 - 1 of 1 Posts

69 Posts
Discussion Starter · #1 ·
I have already done the trigger work a couple monthes back

Got all my materials together, ready to start the rest of the project
Tonite I drilled and tapped the recoil lug and put in the set screw-good and tight now.
I will start inletting the action tomorrow to acraglass it
Got a couple screws for the action long enough to go all the way thru the stock +1 1/2 inches-cut the heads off to use them for lining up the action in the stock and to help remove the action after the bedding has set up :t
After the bedding is done it will be off to the paint shop for the complete rifle (stock, bbl, action, scope, and bipod) to be painted camo.

Hope to have it complete W/pictures sometime in the next 2 weeks
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.