It’s the ruger LVT in a hogue stock if I’m not mistaken. They tend to shoot pretty well. Good shooting.
TALO Distributor Exclusive #31173
I purchased this 10-22 from Davidson's Gallery of Guns. Upon receipt I stripped down to clean an inspect and found 1 of the 4 rail mounting screws stripped, a longer screw fixed that issue, I then found some raised metal on the bolt face, apparently it was dropped prior to installation, I was able to smooth it up with a small stone wheel. I cleaned off some black paint overspray from the inside top of the receiver. All else looked fine, the BX trigger breaks at a constant 2.5 lbs, the Hogue stock is rigid with good clearance with the barrel.
![Wood Scaled reptile Metal]()
First trip to the range today, had a few FTFeed issues with a BX25 mag, none with a 10 round. Appears it likes expensive ammo and dislikes Remington.
Next range trip I will continue ammo testing and getting more familiar with it.
Not including the scope and rings which I already had I have $410 invested in it.
![Circle Art Font Recreation Illustration]()
![Font Circle Recreation Symbol Illustration]()
![Font Circle Art Carmine Number]()
![Font Circle Art Recreation Handwriting]()
First trip to the range today, had a few FTFeed issues with a BX25 mag, none with a 10 round. Appears it likes expensive ammo and dislikes Remington.
Next range trip I will continue ammo testing and getting more familiar with it.
Not including the scope and rings which I already had I have $410 invested in it.
Attachments
1 - 7 of 7 Posts
nice rifle you have there 
a quick question about the trigger blade on that BX..is the face of those grey triggers blades smooth like the one on the left, or grooved like the plastic one on the right?...thanks for any info
![]()
a quick question about the trigger blade on that BX..is the face of those grey triggers blades smooth like the one on the left, or grooved like the plastic one on the right?...thanks for any info
It's gray/grooved.nice rifle you have there
a quick question about the trigger blade on that BX..is the face of those grey triggers blades smooth like the one on the left, or grooved like the plastic one on the right?...thanks for any info
![]()
1 - 7 of 7 Posts
