Rimfire Central Firearm Forum banner
1 - 3 of 11 Posts

· Moderator
Joined
·
34,886 Posts
ttshooter is one of our sponsers here at RFC and he does excellt trigger jobs on Classics. My other question is do you have the new style magazines? T/C was replacing the old ones for free. I think they still are. Most of the feeding problems people have had with T?C's is either a dirty gun or old style mags. I find if I clean the action out with Gun Scrubber every 400 rounds or so mine is dead reliable. Yeaster I had one stove pipe jam....the first in a long time but the rifle has about 350 sice cleaning and all 5 of my mags are old style.
 

· Moderator
Joined
·
34,886 Posts
There was some pictures posted that show the difference and you may be able to run a search on the T/C forum and find it. Since I have only old ones (mine work so well I haven't bother T/C for replacements) I'll have to go by memories and you know how dependable that can be! The old one are solid on the sides and almost smooth with just some very slight raised or lowered areas. T he new ones have very marked depressions on the sides, The side of the mag has two very deep hollows.

If any of you guys could post a picture of the new mags would you please do it? Thanks so much in advance.
 

· Moderator
Joined
·
34,886 Posts
I have the Weaver RV7 2.5X - 7X 28mm scope in Talley mounts on mine. It is such a pretty little rifle I just could not bring myself to putting some huge, klugy 36X scope on it. I'm very happy with this combination. :t :t
 
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top