Rimfire Central Firearm Forum banner

Synth. stock: opinions please

1777 Views 34 Replies 15 Participants Last post by  Artifex
Just wanted to here some opinions and gleen some knowledge,
What are some good synthetic stocks and where is the best place to look at pics/specs ? I think I have decided this what I want and just need to narrow it down to a couple of choices.

Ps. I have a Houge in the factory contour, I like it but want something stiffer, aslo I am looking for a .92 dia stock.

Thanks in advance

1 - 2 of 35 Posts
I love my Hogue! I looks and feels great, and my rifle shoots great in it.
Hogue mods.

I bedded the action in acraglass. It took only a tiny bit of compound to do the job. I also put just a little bedding near the foretip of the stock to center the barrel in the channel -- not enough to really provide any extra upward pressure. The action screw was also a little long for my Adams and Bennett .920 stainless barrel, so I filed a couple of threads worth of steel off the end. As far as modifications to the stock, those are all I have found necessary. The finished rig shoots consistent five shot groups at 50 yds. of .5 inch or less -- depending on what kind of day I'm having!
I suggest you read up on the info here at RC. These guys know their stuff. They can be invaluable.
Good luck with your project!
1 - 2 of 35 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.