Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
Will a 50mm scope fit on a stock Ruger scope rail without hitting the barrel? Right now i have a scope that has a 50mm objective, and i dont have my 10/22LR to test fit it here with me, is it possible or will the scope hit the barrel? I also have the .920 barrel. Thanks guys.
 

·
Registered
Joined
·
8,352 Posts
it will fit

i have a stock scope rail (Weaver TO-9) on my 10/22 and a Mueller eraticator 8.5-25X50mm with AO i used Millett high angle-loc weaver style rings there is about 1/16 to 3/32 of an inch under the objective this allows the AO to turn and clearence for butler creek scope caps. make sure if you go with Millett you get the ones for the TO-9 base. I only run Millett rings all steel windage adjustable and less than $20.00 for blued and less than $25.00 for nickel from Midway. keep :snipersmi
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top