Rimfire Central Firearm Forum banner

Single shot 10/22?

540 Views 4 Replies 4 Participants Last post by  marksman1022
I have been tinkering with my 10/22 for a little while now. I have chamferred the bolt, made auto bolt release, jb weld trick, and added speedlock hammer, volquartsen exact edge extractor, volquartsen bedding kit, hogue OM stock and 16" Clerke barrel. Did everything except for hammer, extractor, and bedding and all was working fine, however, after I installed hammer, extractor, bedding kit and filed a little more of the jb weld on sear I have seemed to have a single shot 10/22. What I mean by this is that after I chamber a round and fire it, it ejects, but then the trigger is still depressed and I have to cycle the action ejecting the chamberred round before I can fire another shot. If anyone could provide any ideas about why this may be happening the information is welcomed and appreciated. Thanks in advance.

1 - 1 of 5 Posts
I agree with GHP I believe the trigger is not resetting it can be from the jb weld being too thick or too rough or from the plunger spring being too light or not being installed properly.Check these things and get back with us.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.