I have been tinkering with my 10/22 for a little while now. I have chamferred the bolt, made auto bolt release, jb weld trick, and added speedlock hammer, volquartsen exact edge extractor, volquartsen bedding kit, hogue OM stock and 16" Clerke barrel. Did everything except for hammer, extractor, and bedding and all was working fine, however, after I installed hammer, extractor, bedding kit and filed a little more of the jb weld on sear I have seemed to have a single shot 10/22. What I mean by this is that after I chamber a round and fire it, it ejects, but then the trigger is still depressed and I have to cycle the action ejecting the chamberred round before I can fire another shot. If anyone could provide any ideas about why this may be happening the information is welcomed and appreciated. Thanks in advance.