Awhile back I posted that my new Scout had erratic ejection, mostly to the left side. I also said a guy at the CZ service department was less than helpful. He clearly could not have cared less about my problem. Told me that as long as it ejected the brass anywhere I was "good to go". Never mind whether it hit the scope, dropped back into the action, or what. Well, today I finally got around to pulling the extractors out and working on them. The right side extractor was bevelled straight, so I took a Dremel tool and contoured it with a curve that fit the case. Voila! Perfect ejection to the right the way it is supposed to work. Thanks for nothing, CZ guy!