Rimfire Central Firearm Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
845 Posts
Discussion Starter · #1 ·
Hello just a few questions if anyone has had this problem with their .22 mag..
Only upgrades done to this firearm is a Boyds thumbhole stock..I changed stocks and headed to the range...When pulling the trigger a little snap and no ignition...It is leaving a notch in the bullet.....Any chance of a whole box of shells being bad....Or possibly tightening the stock bolts to tight????

thanks in advance for your answers

jay
 

· Registered
Joined
·
3,308 Posts
Or possibly tightening the stock bolts to tight????
jay
Jay, I ran into a guy at the range who had a .17 HMR. He said when it came from the factory, the stock was poorly fitted, and when he tightened the stock to action screws down, he had exactly that issue. Try loosening them off. I don't think the savage action is super strong, and you can distort it.

Ron
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top