Rimfire Central Firearm Forum banner

Rifle Basix Sear Kit Model SAV-R

413 3
Is for sale in the trading post..............thanks.
1 - 4 of 4 Posts

·
Registered
Joined
·
1,028 Posts
Ric44;
Did you get frustrated with it ?? !! I am ready to pitch mine.........as a last resort, I am taking it to a gunsmith and see if he can get it sorted out....it was ok for several months set at 14 oz.'s then started going all over the place and the more I fool with it the worse it gets !!!! Probably just me but it is getting frustrating :confused: !!!!
glenn
 

·
Registered
Joined
·
1,028 Posts
ric44 said:
Mine worked fine, I installed it per directions and havent had a bit of trouble.
I said the same thing for several months.....not sure what went South.....it is supposed to adjust from approx. 10 oz.'s to 1 and 1/2 lb.s and I checked it yesterday with my Lyman gauge and it would fluctuate between approx. 1 lb to over 3 lb.s and the sear and pull weight screws where tight!!!! Scratch my HEAD !!!! :(
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top