Rimfire Central Firearm Forum banner
1 - 1 of 13 Posts

· Registered
109 Posts

The color of a laminate stock is derived by dyeing thin veneers of wood under pressure and then glueing them together under pressure. The Apache Gold Tac Driver that I have has about 35 layers of veneer (5 colors repeated 7 times). It is unfinished, raw wood. Sanding and applying finish coats do not affect the colors as far as bleeding. A clear coat over an unfinished stock will just enhance the colors. Hope that helps.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.