Rimfire Central Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
486 Posts
Discussion Starter · #1 ·
I finally went ahead and TOTALLY dissasembled my Mossberg model 340KA. I found the strut and spring assembly.

The gun has a 5 lb. pull w/ no creep etc.

I'd like to lower the pull. Should I

A) Stretch the spring

B)Cut it smaller (not by much)

C) Replace it w/ a smaller spring

D) replace it with a larger sping

It seems that a smaller/ weaker spring would yield a lighter weight of pull. Thaks.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top