I thought I'd done some good work in free floating the gray ghost (Pic below) but to my surprise I discovered that the rear mounting patch at the rear of the receiver was undersized and the action was moving like a balance beam over the one action mounting screw.
Today I bedded the rear of the action with some Devcon to stabilize it and put some spacer in the front to maintain the barrel floated and centered. I may put another small pressure spot just ahed of the Vclamp for the barrel. Part of my Teeter Totter action assembly was the portion of the Tactical Solutions barrel clamp which was proud of the receiver mounting surface near the action screw. Got that area relieved with some chisels.
Couldn't help but notice the same spot on the new Magpul stocks is slightly oversize and grips the back of the 1022 a good solid purchase.
I love Ruger products but occasionally the muck things up in a grand fashion. The mounting of the 1022 action being one example and the failure to make the Mini 14 AR magazine ready and instead substitute their troublesome hard to use magazine system on the gun.
