Rimfire Central Firearm Forum banner

on barrel brop.....

490 Views 4 Replies 4 Participants Last post by  Dakotan
:confused: Has anyone ever tryed to shim the barrel insted of using the gunsmith block?
1 - 1 of 1 Posts

· Registered
Joined
·
357 Posts
Another alternative

I use the PC scope base that extends onto the barrel and has two 6x48 screws going into the barrel. I believe that it not only solves the barrel droop problem but adds some rigidity to the barrel/action. Of course you need the equipment to locate, drill and tap holes etc., or have a gunsmith do it but I believe it's worth the effort.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top