Rimfire Central Firearm Forum banner
1 - 4 of 14 Posts

· Registered
Joined
·
59 Posts
Discussion Starter · #1 · (Edited)
Im looking for a barrel for my first build. Trying not to exceed $400ish for the entire build and less the better. Trying to stay close to $100 for the barrel.

I wanted to go with a Bull Barrel similar to the “hogue tactical target” barrel. The particular barrel has a type of swirl going down it if you ever seen it. I think I will have to go with fluted or nonfluted as that barrel was factory proprietary as far as I know. Anyone know of vendors with similar barrels?

Im also questioning a threaded barrel. I take it regular barrels are crowned and fine and any compensator has some sort of benefit like reduction of recoil or barrel rise. And possible future can. Anyone feel I should go with a theeaded barrel for my first build?

I was looking at AR7s website at their bull barrels. Are all barrels that say “match” sufficient? Im going to use the gun for range shooting only.
 

· Registered
Joined
·
59 Posts
Discussion Starter · #8 · (Edited)

· Registered
Joined
·
59 Posts
Discussion Starter · #9 ·
Again, thanks for all the replies.

I could see myself saving for the Kidd barrel but I could also see myself buying a $100 barrel.

I will be using this at the range to likely hit steel target and punch paper here and there. Maybe shoot a squirrel one day.

I like to shoot a variety of guns so this would not be my main focus and $300-400 was my mental budget for the gun. I actually started researching this week because I was going to buy a used Ruger Tactical Target with that above barrel and a hogue stock for about $300.

But these nice barrels are tempting.
 
1 - 4 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top