Rimfire Central Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
I am pleased to announce the addition of Wipe-Out brushless bore cleaner to our list of available products. PatchWorm and Wipe-Out is a natural combination for safely removing all traces of copper and other fouling.

For those not familiar with Wipe-Out, it is a revolutionary cleaning solvent. Just fire a short burst into the muzzle or chamber and its rapidly expanding foam will fill the barrel. After sitting for 60 minutes, a couple of passes with a properly fitting cotton patch is all that's needed to remove all fouling. Very heavily fouled barrels may require overnight treatment.

Wipe-Out completely dissolves copper, brass, bronze (don't use a brush), carbon and powder fouling. It does not dissolve lead, but degrades it so that it can be pushed out with a patch. It's safe with all steels and cannot cause rust.

George
20/20 Concepts
http://patchworm.com
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top