[SwampF0X]

There isn't anything wrong with the 18"ers. If you find a good deal go for it. The 16" is just a little bit lighter and a tiny bit faster velocity wise. Not worth spending extra money on.

Personally I'd save some money on the auto bolt release and magazine release. You can easily make both of them for nothing. Check out the tips and tricks forum. It takes all of 10 minutes to make an auto bolt release using a dremmel. About the same for the magazine release.

All those little parts add up fast. Before you know it you'll have $700 in a .22lr. IF you ever decide to sell, it's very hard to get your money back out of these little boogers. Save where you can. Spend when you must.

Buy a Weaponskraft bolt buffer. You don't need the takedown screw, although it is nice to have.


JMHO
swampf0x

 

[SwampF0X]

He will modify the factory extractor. Randy claims that an aftermarket extractor in unnecessary after he reworks the original; however, Most people still recommend installing a VQ extractor. It just works better, for most people. Buy one and send it along with your bolt and randy will install it instead of reworking your original extractor.

sf