[21753]

first of all i'd like to thank everyone on this site for all the helpful & generous info... secondly, i'm in the process of building my very first ultimate.... i got a revival yukon stock on it's way, and will be ordering a GM SS flutted bull barrel... now it's just a question of figuring out what length i'll be needing. i understand that 16" is for carry and i might even attain higher velocities with a 16"er (thanxs swampfox) and 20" is better on bench, but what about 18" ? is it an all-arounder? i will be doing a lil of everything... hunting,plinking and friendly competition...what are the chance's of encountering problems when come's the time to install my new stock/barrel, if any?
i'd also appreciate a lil help to be pointed in the right direction for the next "must do's" for an ultimate... NOTE:i already have a 2 1/4-2 1/2 pound trigger pull and decent scope... finally i'd like some info regarding free floting barrels and Bedding the action, it's pupose and all of it's advantage's ....

thanxs again everyone,
luv this site,
Goose25

 

[21753]

i was just wondering if i might encounter "fitting" problems, wasn't too worried about the disassembling/assembling part quite yet.... sorry, i also forgot to mention i already have 3 BC (25 round)steel lips clips....what exactly will the "vq auto bolt release" do? and should i be thinking about getting a Bolt Buffer ?

thanks,
goose

p.s.
nice lookin' rifle 'dare!

 

[21753]

it's coming along...

My project is finally coming along,so far this is how my rig is gonna be set up.... I'd appreciate a 'lil input..... I'll be posting pics asap...

revivals yukon electric blue stock
GM SS flutted 18" bull barrel
VCL Target Hammer
VCL Auto Bolt Release
VCL Extended Magazine Release
VCL Hex Head Take Down Action Screw
WK Bolt Buffer
Bushnells 3-9 x 32mm

I was originally gonna go with a 16" barrel , but unfortunatly it aint as easy as some may believe to have parts sent to "Banada"... and as for the scope goes, i know it aint top notch... but will it do???? not bad for my first ultimate (they'll be others... muahahahahaha)... and first rifle!!!

I'm i missing anything

 

[21753]

randy's bolt work

Ricochet, what will randy do exactly to the bolt, and what is the purpose??? I'm sure it's been asked before but couldn't find it...
i'm also reading on an other tread about hyper velocity ammo.... can i use HV ammo with my set up...(with the exception of CCI stingers)???

 

[21753]

extractor

IMO, put an aftermarket extractor in it as well, money well spent. Just my .02

.... if i get randy to do a bolt job, will he install an aftermarket extractor??? ...

(as quoted from his site) "CPC does bolt rework using customer provided aftermarket extractor and/or firing pin - but I do not recommend the buying of either."

... so what is he saying??? does he want to install a new aftermarket extractor or is he planning to modify the factory one??? i ain't following him here!!! hahahaha