I have this model 52 for close to 20 years and have never shot it. I now wish to turn it into a 95% target gun, 5%hunting. Looking to shoot everywhere between 25-30 yards and long range & silhouette. Mostly 50 & 100 bench to see how far she will go. Bought a Hawke 6-24x56 30 SF thinking she would go on it but after looking it over it looks like it may not work, but if it does will need a serious cheek rest pad. I know the bolt handle issue is a problem on these but once I started the process I had no idea of just how frustrating
it was going to be. If..... if the scope doesn't work out on this gun it's really no big deal as I wish to get another high end .22 for strictly target and most of them come with the 60% handle. I am looking to mount a tactical variable scope with as much magnification as I can get (26-36) with focus & parallax down to the 25-30 yard range if possible and all the other bells and whistles (return to zero, locking, (lite reticle if option) if possible, great glass) I would say $1000 would be my limit.
The Hawke in the picture has a 30mm tube and front 56mm objective which clears the barrel by about a 1/4" with the burris bases and 8 glued pennies atop... but the bolt handle is VERY close and tough to see if she'll actually clear the bolt to use. SK was going to make the split bases and rings for this gun but when I sent him the pic she stated "won't work, get a different scope". Actually this setup "might" clear as is and I would just have to use a cheek rest pad as she is high but not sure if having like this is a realistic look/approach. (opinions pls) Just for reference the 8 glued pennies are .450 in hight. Owner at SK told me to do the penny trick and let him know as he can determine height by # of pennies. If I did go with SK then I would have to remove the burris bases. If things work out would SK be a good option for bases & rings or just stick with burris and ??
So, I'm not really sure what to do. Since this Hawke has a 30mm tube does that mean I must switch back to a 1" tube as I would assume it would have a smaller ocular lense which is really where the problem arises. Do they make other high magnification scopes with 30mm tubes like above that have a smaller ocular lense ? Granted the 56mm objective on current scope is big but she clears by 1/4 but if I had to downsize that end of the scope to get things to fit I would.
I just don't know who how much of a scope I can put on her to get her to clear the bolt handle and barrel.
If setting this scope up this high (like in pic) works should I go with it or does it look out of place ? It's really just the rubber ring on the ocular end of the scope that is close, not the tube. If it weren't for those rubber turning knobs the scope tube would clear easily and could be dropped down somewhat.
(lastest picture) I JUST MOVED THE SCOPE AS FAR FORWARD AS I THOUGHT THE RINGS WOULD ALLOW AND MAYBE THE BOLT HANDLE WILL CLEAR THE RUBBER KNOBS AND POSSIBLY ALLOW THE SCOPE TO DROP A SMALL BIT. Would anyone happen to know what rings (heigh) might work for the burris bases I have. I would like to get and assemble to see if my problem is not longer a problem.
Does anyone have any specific scopes they feel might better help the above problem. Would love to put a scope on her with the specs like the one I have ..... I just don't know
if it's possible.
I sure hope someone can help me.