Rimfire Central Firearm Forum banner
1 - 1 of 12 Posts

· Registered
3,500 Posts
Tuning up the trigger is a good choice and the bolt buffer is a must!

The mag release is something I do myself, I built mine up with epoxy putty and then filed it to what I wanted. You can use your old bolt stop pin too, just drill the bottom of the release and insert the pin with an adheasive of some kind. Others have just drilled and tapped them for a bolt or screw. One I saw that was neat was a guy drilled and tapped the release and used a knulled torx cap screw and had a brass sleeve around the screw. Lots of choices when it comes to home modified mag releases.

Dave Z.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.