Rimfire Central Firearm Forum banner

MUST-HAVE ADDITIONS to your custom

661 Views 11 Replies 11 Participants Last post by  armbar
Hi all, I have a "dressed up" 10/22 GM bull barrel & Hogue overmold and I am planning to add a VQ extractor seeing how everybody raves so much about them. Are there any other highly reccommended add-ons (for reliability/ease of use), or does it come down to individual tastes from here?
1 - 12 of 12 Posts

· Registered
Joined
·
3,500 Posts
Tuning up the trigger is a good choice and the bolt buffer is a must!

The mag release is something I do myself, I built mine up with epoxy putty and then filed it to what I wanted. You can use your old bolt stop pin too, just drill the bottom of the release and insert the pin with an adheasive of some kind. Others have just drilled and tapped them for a bolt or screw. One I saw that was neat was a guy drilled and tapped the release and used a knulled torx cap screw and had a brass sleeve around the screw. Lots of choices when it comes to home modified mag releases.

Dave Z.
 

· Registered
Joined
·
1,709 Posts
My list:

Weaponkraft Bolt Buffer
VQ hammer
VQ extractor
Power Custom sight base
(If you liked extended mag releases, I use Ranch Products)
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top