Rimfire Central Firearm Forum banner

Mrk 3, 22/45 Pin Alert!

399 Views 8 Replies 5 Participants Last post by  cadillo
Yo Pirates - Ran across this thread at Bullseye's excellent site regarding the Mark III, 22/45 pistolas. I called Ruger at 603/865-2442, left a voice mail and got a call back in less that a couple of hours - My replacement pin is on the way at NO CHARGE. They did need my serial number to verify the year of manufacture as the upgraded pin was used after June 2007 an is not an issue with the later models.

I urge all of you Mark III, 22/45 owners to check out this thread and take a close look at your pistola: http://guntalk-online.com/forum/viewtopic.php?t=937
1 - 1 of 1 Posts

· Registered
Joined
·
364 Posts
Actually, and I could be wrong about this, but the pin is "captured" on a metal framed model by the Grip panels, and unless they are ill-fit, the pin isn't ever going anywhere. I don't have any problem with the poly framed models, but if they had just made them for a 1911 frame style grip selection in the first place, the pin floating would probably be a moot point.

JJ
+1
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top