[Ronnie01]

Here is one that is more hi tech in lbs and newton m
buzzer alarm memory digital may be worth the purchase.

http://www.sealey.co.uk/PLPageBuild...dividualTypeID=&category=0&requiredresults=16

R

 

[Bronco 302]

Bronco, do you have a link to the "operator tool kit" and the fix it sticks. I searched some, but could not find it. Thanks.

http://www.eurooptic.com/dta-operator-tool-kit-includes-torque-wrench.aspx

http://www.eurooptic.com/FISTL70-FIS-70in-lbs-Torque-Limiter--Includes-5mm-bit----for.aspx

There ya go. Makes for a very compact kit.

 

[patseale]

Borka Tools - because its a very compact kit. My kit even has a multi-section cleaning rod.

Seeing the above post I began to look at the Borka Tools and discovered just what I was looking for as my go to home and range scope mounting torque kit. Boris put together a custom kit for me which includes two Precision Torque Limiters, one at 15 inch-lbs for the upper ring screws and the other at 25 inch-lbs for the ring base screws.

Just finished the install of a Leupold VX-1 2.5 x 7 rimfire scope on my new CZ 452 American in .22LR and really like the design and feel of the PTL wenches. :bthumb:

So, thought I would add these tools to the list of possibilities for anyone in a search for quality torque wenches. Also, Borka Tools new Adjustable Torque Driver Kits will be available soon and are indeed worth a look IMO and on my bucket list.

I might add that the customer service with Borka Tools is an exception and none better. :t

 

[brenne93]

PABear thanks!

I did not realize I had to adjust fat wrench to zero each time!!!!

 

[michiganman18]

re

All torque wrenches should be stored at zero. I will go far enough to say that as a rule measurement devices, and precision instruments should be stored at zero if at all possible.

 

[DavoM]

Seeing the above post I began to look at the Borka Tools and discovered just what I was looking for as my go to home and range scope mounting torque kit. Boris put together a custom kit for me which includes two Precision Torque Limiters, one at 15 inch-lbs for the upper ring screws and the other at 25 inch-lbs for the ring base screws.

Just finished the install of a Leupold VX-1 2.5 x 7 rimfire scope on my new CZ 452 American in .22LR and really like the design and feel of the PTL wenches. :bthumb:

So, thought I would add these tools to the list of possibilities for anyone in a search for quality torque wenches. Also, Borka Tools new Adjustable Torque Driver Kits will be available soon and are indeed worth a look IMO and on my bucket list.

I might add that the customer service with Borka Tools is an exception and none better. :t

Have used Borka for quite a few years. Not the cheapest but well thought out and good build quality. Thanks for heads up in the new adjustable - will have a look.

 

[former farmer]

I've been recommending the CDI 401SM now for several years.
Superb product, and Made in the USA.

Just ordered one from Zoro. 20% off through 12/11/17. Total cost less than $125 including tax and shipping.

 

[StickShift]

Like a few of the guys here, I use a Borka kit - an ATD EFK in my case.

http://www.shooterstools.com/Pages/ATD/atdkits.html

It's more expensive than a standalone torque wrench, but the handy carrying case, drive sets, and standard ratchet are very useful at home and at the range. The PTL kits are lovely if you have a specific torque setting you consistently use.

 

[Ceapea]

I have this one...a CDI.
I like it a lot. I also return it to lowest setting, as they recommend in the manual.

https://www.amazon.com/CDI-401SM-Ad...=8-3-fkmr0&keywords=cdi+torque+wrench+5+to+40

 

[wmrike]

Good on ya' for looking at torque wrenches. I use beam type wrenches - nothing to get out of adjustment. Old-fashioned that way, I guess.

When one is presented with the various materials (steel, aluminum, etc) and the myriad threads, there are so many torque possibilities and so many ways to screw thing up. it just doesn't make sense to guess. Things can go haywire fast. A good wrench is especially nice when trying to identify the sweet spot for action screws, and then later being able to accurately replicate the torque.

 

[n7blw]

Except verniers and calipers

All torque wrenches should be stored at zero. I will go far enough to say that as a rule measurement devices, and precision instruments should be stored at zero if at all possible.

Verniers and calipers should be opened a few thou in case temperature changes expand the device jaws. Don't want to spring those precious tools.

 

[petespillars]

Just ordered one from Zoro. 20% off through 12/11/17. Total cost less than $125 including tax and shipping.

X2

Sent from my SM-N950U using Tapatalk

 

[teetertotter]

Vortex VT-CTW

I did have the Neiko 10573B and found it to be long, bulky, and heavy.

I replaced w the Vortex VT-CTW Torque Wrench that fits much better in the range bag and a nice fit in your hand.

 

[doubs43]

Years ago I found a Utica torque wrench that was NOS. Apparently the seller had found a cache of them. They were high dollar wrenches being sold for a small fraction of their retail value. I bought one and have been pleased with it. My CZ rimfire rifles work best at 18~22 inch-pounds on the action screws. The Utica is also perfect for scope bases and rings.

However, the Utica only goes to 36 inch-pounds and my centerfire rifles often work best when the action screws are at 40 inch-pounds or more. So I now own a Fat Wrench too.

 

[SavagePlinker]

I think a torque wrench is it good idea when you are new to assembling actions to stocks or mounting scopes and rings .When you do enough of them you will see you won't even need a torque wrench as you kind of get the hang of different torque settings naturally when it comes to firearms IMO

:yeahthat:

Right or wrong, I just rely on FEEL any more.

 

[Penage Guy]

I think a torque wrench is it good idea when you are new to assembling actions to stocks or mounting scopes and rings .When you do enough of them you will see you won't even need a torque wrench as you kind of get the hang of different torque settings naturally when it comes to firearms IMO

:yeahthat:

Right or wrong, I just rely on FEEL any more.

I suppose a lot of experienced shooters have a superlative sense of awareness for getting the best torque on their fasteners. As a result they can easily afford to forgo the cost of a quality torque screwdriver and go by feel alone. They have a reliable and uncanny ability to feel how much is not enough or too much when it comes to their valued scopes and rifles and getting the best out of them without risk of anything going awry.

I am not possessed of such instincts and experience and have elected to go with the torque screwdriver recommended by Smoothtrigger, the CDI 401.

 

[n2omike]

I like this beam style. It gives the best feel. It's an old American made piece I purchased off Ebay. The entire thing is around 6-3/4" long. I also have it's bigger brother. I originally bought it for automotive use (measuring rear end bearing preload) but use it more for guns nowadays. As long as you take care of them, these wrenches will never lose their calibration, and are designed to multiple lifetimes. I believe this company also made tools for Snap-On.