Rimfire Central Firearm Forum banner

Mossberg 144 LS

774 Views 10 Replies 6 Participants Last post by  Rosscoe
I recently acquired a Mossberg 144 LS with the Lyman peep site. I got it because I would like to try my hand at target shooting with a peep site. All my rimfire target rifles are scoped. This should be challenging. I was a bit disappointed that when I inspected the bore I found quite a bit of rust and some pitting. I am guessing it was not cleaned regularly probably due to having to remove the rear site to get the bolt out. I have been trying to get it out with some limited success. I am hopeful that the accuracy is unaffected. If someone who reads this post has a copy of the illustrated parts diagram for this rifle I would sure like to get an electronic copy. The rifle seems to be complete except for the rear swivel which is missing. I am looking for one if anyone has a spare. Still need to remove the stock so I can inspect the trigger and play around with adjusting the trigger pull. I would be interestedf in hearing from others who own and shoot this old rimfire rifle.
1 - 1 of 11 Posts
If you push on the side button (very stiff) you should be able to lift that part of the sight out and remove the bolt.
144LS instructions.
Font Paper Motor vehicle Paper product Document

And another parts diagram.
Font Tool Rectangle Musical instrument accessory Machine
See less See more
  • Helpful
  • Like
Reactions: 2
1 - 1 of 11 Posts