[mr2.0]

Fire 300 rounds of cci blazer and no problem, put it the wolff MT got a misfired once in every 3 shots, put the blazer back in and no problem. so can someone tell me whats going on?

 

[mr2.0]

I've collected all misfired rds and put them all in one magazine and they all went off second time around. My TR has about 7k+ round thru it btw.

 

[mr2.0]

Thanks I would try it to see whats gonna happen, maybe a new spring but that doesn't explain why it still shooting fine with cci blazer, maybe a bad badge of Wolf Mt? Stripped the bolt and cleaned thoroughly btw. Thanks

 

[mr2.0]

Just stripped entire bolt assembly, polish everything from striker pin to firing pin and inside and outside of the bolt. I did notice a very faint mark on the round tip of the striker ( next to the C clip) where it meets against the back of firing pin stopper, probably nothing but worth mentioning.

Pulled the projectile off the a Wolf round and off a Blazer round, dumped all the gun powder out from each case and insert them in the TR chamber, pulled the trigger and they both ignited. I compared the case of each brand and the Wolf seems to have deeper indentation. Maybe it just a bad badge from Wolf with hit or miss primer.

I'll order some more Wolf to see what gonna happen. Thanks guys

 

[mr2.0]

Yup, I just place an order for 2 springs from those folks( very nice people). Will let you guys know how it performs. Tam

 

[mr2.0]

The springs came home today. Installed and test fire with empty brass, It's noticeable deeper with new spring. Will test it with Wolf this weekend and see how it goes. Tam