Rimfire Central Firearm Forum banner

Messing around

523 5
I had the old stock that came with my 10/22 begging to have something done with it. I sanded the barrel channel open and rounded a few corners and this is what I ended up with.

I sprayed it in "Italian Olive" from krylon and used a satin clear coat (two coats)


the barrel is completely free floating everything sits level I am hoping to try it out tomorrow after class.
1 - 6 of 6 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #6 · (Edited)
I drilled the stock today to install sling swivels. I didn't get to shoot due to rain but thats ok. I took a flat fender washer and fitted it into the stock where the reciever and take down screw meet gave the barrel a little more clearance. Also installed my bi-pod. Also ordered a butt pad that would add about 1" to the overall LOP.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top