Rimfire Central Firearm Forum banner
1 - 2 of 2 Posts

414 Posts
I used an old rickety fruit crate. Removed the old nails, then pre drilled the same holes for screws. Used wood glue when I assembled with screws. Drilled the backside and edges/corners for a little zip tie reinforcement.

Filled it with three slabs of that clay stuff sold by online airgun dealers for renewing one of their pellet traps.

I use some clamps to act as a bracket for holding an inexpensive clamp-on reading lamp. Targets stay put with nails pushed through the paper and into the clay.

When pellets stack up after months of shooting, dig some out and shoot some more (it is used a whole lot more than this old picture shows)

Will work for the rest of my lifetime

sorry about the order of the photos- they’re best viewed from bottom to top.
Font Circle Art Pattern Symmetry

Gas Audio equipment Transparency Glass Art

Wood Gas Metal Art Electrical wiring

Wood Art Rectangle Font Publication

Brown Window Rectangle Wood Wall

Plant Rectangle Wood Trunk Tree

Brown Rectangle Wood Shipping box Wood stain
1 - 2 of 2 Posts