Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
3,017 Posts
It's a "pull-through" . The weedeater line model doesn't use a brush. The patch holder is merely a bulbous end made by heating the line. You can make one yourself by heating the end of the line and forming a small ball while still hot. Or by forming the hot end in an empty .22 shell.

Or, ( this is best and easiest) visit http//www.patchworm.com/ and buy a ready made kit. They are a sponsor here and a very good company with which to do business. :t

Well durn, that didn't work. Drop down to the Sponsor's Section and click on their link.
 

· Registered
Joined
·
20,675 Posts
the otis pull through system uses a vinyl covered braided cable that has permanently attached ends fitted for a patch and for the brushes that come with the kit in a handy carry case, and is meant to fit both .22 and .17. i like this kit. check out them
all and you decide. the weed whacker is free tho' made a couple and the patch kept coming off. probably didn't do the end correctly, but is only for patches.

your choice, good shopping with our sponsors.








 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top