Rimfire Central Firearm Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,608 Posts
Discussion Starter · #1 ·
"If you loosen those two screws, you can move the mag well forward and aft about 1/32 of an inch. I simply pushed it as far forward as it would go and retightened the screws. Viola! Now the magazines drop free when the catch is depressed. Problem solved."

Thanks AccuRat! Took only a few minutes and the magazine drops right out as it should. Why the original mag worked still puzzles me. Rimfire has always been a source for good information :t Now time to take out the 22 mag for some range time!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top