Rimfire Central Firearm Forum banner

Magazine Holder On Stock

748 Views 7 Replies 7 Participants Last post by  Markbo


This ia a Triple K 10-22 mag holder that I attached to a Baracuda stock with cable ties. It is a bit more bulky than I thought it would be but it does not get in the way of my right arm while shooting.
1 - 2 of 2 Posts

· Registered
Joined
·
1,167 Posts
Discussion Starter · #4 ·
No offense taken, I like to try new things and have very "thick" skin. Ha. You will notice its not permanently attached. There is about 2-3 inches of barrel support under the metal portion of the carbon barrel=no droop. Tension barrels are very rigid.
The gun is a 17M2 so I wanted the extra ammo with it so I could just grab it
and go, walking, in the pickup, or whatever. My belt seems to be permanently occupied by my multi-tool.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top