Rimfire Central Firearm Forum banner

Magazine Holder On Stock

746 7


This ia a Triple K 10-22 mag holder that I attached to a Baracuda stock with cable ties. It is a bit more bulky than I thought it would be but it does not get in the way of my right arm while shooting.
1 - 8 of 8 Posts

·
Registered
Joined
·
122 Posts
Nice rifle! I understand what your line of thought is regarding your mag pouch, but (& don't take this the wrong way) put it on your belt.
 

·
Registered
Joined
·
10,814 Posts
no offense meant

:eek: No Offense meant ,BUT THATS LIKE PUTTING BUMPER GUARDS ON A VETTE..nice looking rifle ...loose the mag pouches ,buy a vest or cut the sleeves off an old army BDU top..lots of pockets :t --Jim-- question do you get barrel droop with that 'cuda stock? seems thier is very little to support anything. i looked at some but that was a concern. ;)
 

·
Registered
Joined
·
1,167 Posts
Discussion Starter · #4 ·
No offense taken, I like to try new things and have very "thick" skin. Ha. You will notice its not permanently attached. There is about 2-3 inches of barrel support under the metal portion of the carbon barrel=no droop. Tension barrels are very rigid.
The gun is a 17M2 so I wanted the extra ammo with it so I could just grab it
and go, walking, in the pickup, or whatever. My belt seems to be permanently occupied by my multi-tool.
 

·
Registered
Joined
·
6,463 Posts
Personally, I like the idea. I have cartridge holders on my 243 win and a homemade one for quick loaders on my muzzle loader. It only makes since to have one for the 22/17.

Get rid of the cable ties, they will marr the finish (in time). Use a velcro fastener of some type.

Nice rifle BTW.
swampf0x
 

·
Registered
Joined
·
260 Posts
I think it was the new TC M2 that had room for an extra mag in the stock of the gun at the butt. Lookes like a cool idea. I think it was in the HM2 forum. 10/22 mags would be too big, but maybe on the side of the stock. Not for yours but an idea for others.

Looks cool. :)
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top