Rimfire Central Firearm Forum banner

I ordered the brown laminated stock

569 Views 6 Replies 6 Participants Last post by  kwjones
"Models 881 & 983 Part# 505327" from marlin. I talked to two different people at marlin, one said it wouldn't fit my 981T, one said it would. We'll see when it gets here! Anyone try this before?

Ted
1 - 7 of 7 Posts

· Registered
Joined
·
1,339 Posts
The newer Marlins like the 925 have an action screw which runs through the front trigger guard opening and anchors the action to the stock along with the traditional barrel screw.

On the older Marlins there was simply a wood screw there and the entire rifle was held to the stock only by the barrel attachment point.

So , if you have an older Marlin you might have to fill in the drilled "hole" in order to use the wood screw.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top