Rimfire Central Firearm Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I've got a friend that shoots his High Standard for bull's eye competion. Anyway, that little hook broke loose and keeps his pistol from feeding properly. So, the queston I have, is that thing soft solderd in??? Mark
 

·
Registered
Joined
·
1,638 Posts
High Standard (hook )

I think you are refering to the ejector.This is mounted on the frame;I think they are originally a press fit. I have had experience with one of these coming loose & secured it with red Loctite.Three years later its still fitting tight.
If you are refering to the hooked item on the slide, this is the extractor.It is held in place by a spring & plunger.This item does not usually come loose.
Suggest you find someone experienced with HS pistols if the problem is the extractor. Its not difficult to change but can result in loss of small parts if serviced by those who are not familiar with the procedure. Rod.:)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top