Rimfire Central Firearm Forum banner

Hogue OM Stock

788 Views 5 Replies 3 Participants Last post by  1022shooter
Does the Hogue OM stock constitute a free floating barrel or is it semi bedded or what? I am wondering because mine seems to float slightly. Would it be feasible to cut my action screw down som to pull it in deeper without hitting the barrel? I am looking for it to be supported more so I don't have to worry about the receiver bending. Is it even a concern?

1 - 1 of 6 Posts
If you buy the VQ bedding kit, you can easily install a different pressure pads. You just stick one in there and if it doen't do what you want, you use the thicker one. You also get a little bushing to put in around the takedown screw.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.