Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
618 Posts
Discussion Starter · #1 ·
Check out this URL:

http://www.gunsmoke.com/scot/guns/1022/22ballistics.html

If you have your scope settings at neutral, using the offset inserts to rough sight in your scope and can get it around 1/4" high at 25 yards (using the same velocity ammo), your trajectory should approximate the table above, crossing your line of sight again around 60 yards. Then you'll have plenty of scope elevation adjustment left for a 100 yd. zero. Aren't those Burris Signature rings wonderful? :D
 

·
Registered
Joined
·
77 Posts
I was at the range yesterday to sight in a new 10/22. It was shooting like 8" to the left. I have the -5/+5 in the front and -20+20 in the back. PC custom base burris sig.zee rings leupold vxiii scope. :(
 

·
Registered
Joined
·
122 Posts
hmm

what yardage were you shooting at?

Sounds like a possible case of "the bump".

Check out the link to fix the bump problem. Its either in tips and tricks or scope rings & mount forum.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top