Rimfire Central Firearm Forum banner
1 - 1 of 7 Posts

· Registered
Joined
·
10,461 Posts
I have been shooting my 22LR Varmint in a custom stock with just the one action screw. I too removed the front lug from the barrel.
I have glass bedded the front of the action and about a 1/2 inch of barrel and the rear under the rear tang. I then glass bedded or I should say pillar bedded the one action screw. It shoots very good.
 
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top