Rimfire Central Firearm Forum banner
1 - 1 of 12 Posts

· Registered
97 Posts
ShootNut said:
Your aftermarket target barrels have a Bentz chamber in them, which is tighter then the factory sporter chamber. Most of these barrels will have a warning right on the barrel which should tell you "May not extract unfired rounds" or something to that effect. So it is perfectly normal, putting in a good extractor will sometimes solve the problem.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.