Rimfire Central Firearm Forum banner
1 - 1 of 3 Posts

· Registered
6,463 Posts
Clean your rifle real good. Pay special attention to the bolt face, extractor groove and chamber. Tune your mags. There are directions around here somewhere. Use a light coat of quality Dry Lube (Remmington Dry Lube works great)
Get yourself a VQ extractor and a weaponskraft bolt buffer. See if that helps.

Extractor from Hawktech=$12
Bolt buffer from weaponskraft=$6

If that doesn't help, send your bolt to Randy at CPC=$50, and polish your guide rod with fine sandpaper= free time

All these things together will help make your 10/22 run more reliably and smoother. Even if it doesn't fix the problem, it's still good practice to do all these things .

good luck,
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.