[wobbles99]

Hi guys,
Just recently bought a 10/22 carbine and love it except for one little snag.
Every twenty to twenty five rounds a get a casing that does not fully eject and jams the action open. I have tried three different ammos and I get the same result. I would venture a guess that the extracter just isn't releasing properly but I am not one hundred percent sure. All other times the cartridges eject with excellent force. I have about 1000 rounds through the gun and otherwise I love it. has anyone seen this before?

 

[wobbles99]

hey thanks guys. I pulled my gun right apart this time and scrubbed every piece.
What I found was some burrs on the extractor claw. I filed these down and polished it with some crocus cloth, then oiled and reintalled everything. I tried it out in the field and so far it seems to be o.k. I am going to get a buffer and the vq claw in the near future, along with some other mods. I also need to know if anyone has had issues with yellow jackets. They work good with my ruger clip but with my butler creek 25 rounder I find they jam. Is there any other high cap that will work with these? I love using them to drop gophers out in the pasture.
thanks again for the help.