Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
768 Posts
Discussion Starter · #1 ·
I am planning on getting a grub-screw fitted muzzle compensator done by a local gunsmith (for only $25 compared to nearly $50 for VQ's). What is the EXACT outside barrel diameter of an Adams & Bennet bull barrel?
Thanks!
 

·
Registered
Joined
·
67 Posts
I think your best bet is going to be to take a micrometer and measure your own barrel.Like most manufactures the outside barrel diameter will probably vary from barrel to barrel slightly even of the same make.
Bill
 

·
Registered
Joined
·
768 Posts
Discussion Starter · #3 ·
hmm

I don't have a micrometer to measure it with. .920 is listed as the diameter, but how precise is it? Are they actually ".920"? Or are they .918, .922, etc? Could someone with a micrometer measure the OD of an A and B bull barrel?

Thanks!
 

·
Registered
Joined
·
67 Posts
why cant your gunsmith measure it?? Seams to me that he would rather have the barrel in hand and know for sure is all. Maybe try taking it down to your local machine shop and have them measure it for you.
BIll
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top