Rimfire Central Firearm Forum banner
1 - 1 of 21 Posts

· Registered
49 Posts
Take a dime out of your pocket, pull the slide back enough to put the edge of the dime in the chamber. Pull the trigger to release the hammer. It will hold the slide back just enough to allow the pin to strike but not hit the barrel. Works on all my 22's. I don't like leaving the spring pressure on a gun in storage either.
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.