Rimfire Central Firearm Forum banner
1 - 1 of 18 Posts

· Registered
370 Posts
The spring that works the bolt release is the spring that fits in the right side of the hammer. One leg hooks into the notch in the tab of the bolt release the top leg goes under the pin that holds the bolt release in place. You might check and make sure the bottom leg (which has a kink in it) did not miss the notch in the tab.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.