Rimfire Central Firearm Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
A easy DIY mod, if you have a dremel and drill press. I ground the finger pull off the stock charger For the handle I used a cheap old broken hobby knife as the new handle. The knife handle end was tapped to 10-32, So I drilled & tapped the boss. And I also cut a small spacer from the body. Using a 3/4" long set screw and red Loctite to join everything together.



 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top