Rimfire Central Firearm Forum banner

Bubba worked on a Sharpshooter

788 Views 3 Replies 4 Participants Last post by  desertmoon
I picked up a fairly clean Sharpshooter from a dealers table and while checking it happened to pull the slide back. Low and behold Bubba had a mag. that the lips must have been bent too much and the rounds had been hitting the bottom of the chamber. Bubba then filed the bottom of the chamber making him a ramp so said Sharpshooter would not jam. I simply hate to see these old guns damaged ........:( Hope it don't wind up on Gun Broker or Auction Arms.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top